Windows Phone Thoughts: The Moment I've Been Dreading Has Arrived: Office Teardown

Be sure to register in our forums! Share your opinions, help others, and enter our contests.


Digital Home Thoughts

Loading feed...

Laptop Thoughts

Loading feed...

Android Thoughts

Loading feed...



Friday, June 19, 2009

The Moment I've Been Dreading Has Arrived: Office Teardown

Posted by Jason Dunn in "Digital Home Talk" @ 07:00 PM

This is off-topic for all the sites except Digital Home Thoughts, but I thought you all might enjoy this article. OK, yeah, I'm looking for some sympathy. ;-) Have a great weekend everyone!

I've been putting this off for at least two years now, but I finally had to bite the bullet and get it done: I had to tear-down my home office and move it in order to get my floor fixed. We moved into this house in 2001, and finished the basement later that year. We put down berber carpet, which at the time seemed like a good idea because basements tend to be cold. Then we got a little puppy named Keiko - and after a few months that berber carpet was covered in stains (house-training a puppy is a messy business). It was also problematic for me to not be able to roll my office chair from computer to computer - for a while I had a custom-cut piece of Plexiglas on the floor, but over time that cracked and broke.

Not wanting to pay another $500 to replace it, and realizing it was a bit demoralizing to be working surrounded by urine stains, it was time for a renovation to my home office. In 2006 I hired a carpenter, and he sub-contracted a flooring company (Underfoot Floors in Calgary), to re-do several key parts of my office. He built a custom set of shelves for me, and the flooring company ripped up the berber carpet and installed a hardwood laminate floor. For a while, everything was great - but then I started to notice that as I rolled my chair across the floor, it would seem to catch on the floor. Over the next year, I'd find little chips of broken hardwood laminate - bit by bit, I was destroying the floor. The entire point of going with the hardwood laminate was to get something tough enough to stand up to a rolling office chair. I brought in the carpenter and the flooring company, and there was a lot of shoulder shrugging and finger-pointing.

deconstructing-jasons-office-3

Figure 1: This is what the floor looked like after a couple of years worth of my chair rolling over it.

The problem was two-fold: the underlay that Underfoot Flooring used was quite thick. I had asked for a thick underlay in an attempt to plug up some of the awful insulation problems that Bay West Homes inflicted upon us when they built the house - on a cold day, my basement would be a good 15 degrees Celsius colder than the main floor. You could hold your hand along the baseboards and feel freezing cold air blowing in. Knowing nothing about flooring, I didn't realize that by having the thicker underlay would cause the floor to move up and down more. You'd think that the flooring professionals would have pointed this out to me, right? No such luck. The particular flooring that I selected - completely based on colour and design, because hey, what do I know about flooring - turned out to have a bevelled edge, meaning that the pieces didn't lock as tightly together as the indestructible Pergo flooring I had back in my condo. Again, I had no clue - Underfoot Flooring knew this was going in a home office, so I trusted their advice about the flooring options I had.

In early 2008 someone from Underfoot Flooring came in (after much griping on my part), examined the problem, and said the best thing to do was to replace the broken boards - which they'd send someone out to do at their cost - and find a surface to put under the chair so it wouldn't happen again. I was dreading ripping apart my office, so I put it off for months and months. I tried to get in touch with Underfoot Flooring again in late 2008, but struck out - no one was answering their phone, and eventually it was disconnected. I drove past their store front, and sure enough, it was abandoned. And not in the "we're going out of business slowly" kind of way - their store sign was still up, and inside there were still parts of their displays set up. This is a "we don't want to pay our lease and we took anything of value out of the store in the middle of the night" kind of scenario. Their Web site is still up, but the phone numbers no longer work.

So, with much grumbling and groaning, I tore down my office last night in order to make room for someone to come in and replace the broken floorboards. Here are a few photos of the process...

deconstructing-jasons-office-1

Figure 2: Just getting started with the tear-down...

deconstructing-jasons-office-1

Figure 3: All my technology...gone! OK, well, one computer remains, secure on a shelf.

deconstructing-jasons-office-1

Figure 4: And here I thought I kept my office fairly clean. Yuck!

deconstructing-jasons-office-1

Figure 5: So...much...technology.

deconstructing-jasons-office-1

Figure 6: Putting it all back is where the real nightmare begins!

deconstructing-jasons-office-1

Figure 7: Most of the problem was the very thick underlay the flooring company used - it had far too much “give” and the floor-boards would move as I rolled over them in my chair, catching and breaking.

deconstructing-jasons-office-1

Figure 8: All done! Everything is fixed.

And now I'm faced with the daunting task of re-assembling my whole office...it's hard to know where to start, there's so much work to be done. I still need to find something to go underneath my office chair - I've been looking at interlocking gym floor-type materials but I'm not sure how well they'll work, and they're expensive. I'm going to use this opportunity to simplify my office a bit - the Logitech 5.1 surround sound system will probably be replaced by a simple 2+1 speaker setup. And if Windows 7 were out now, I'd probably use this opportunity to tear down and re-build all my computer systems...but the timing isn't right for that. I have quite a lot of work ahead of me this weekend...

Jason Dunn owns and operates Thoughts Media Inc., a company dedicated to creating the best in online communities. He enjoys photography, mobile devices, blogging, digital media content creation/editing, and pretty much all technology. He lives in Calgary, Alberta, Canada with his lovely wife, and his sometimes obedient dog. Maybe he should leave his office in pieces and go buy a 17" Macbook Pro and call it a day.

Do you enjoy using new hardware, software and accessories, then sharing your experience with others? Then join us on the Thoughts Media Review Team! We're looking for individuals who find it fun to test new gear and give their honest opinions about the experience. It's a volunteer role with some great perks. Interested? Then click here for more information.


Reviews & Articles

Loading feed...

News

Loading feed...

Reviews & Articles

Loading feed...

News

Loading feed...

Reviews & Articles

Loading feed...

News

Loading feed...

Reviews & Articles

Loading feed...

News

Loading feed...

Reviews & Articles

Loading feed...

News

Loading feed...