Wednesday, May 22, 2002
Snap-N-Type Keyboard for iPAQ 3800 Series
Posted by Jason Dunn in "HARDWARE" @ 02:23 PM
http://www.mobilefanatic.com/detail.asp?PRODUCT_ID=TT302&REFERER=84348
A few weeks ago, Mike from Mobile Fanatic.com sent me the new SnapNType keyboard for the 3800 series iPAQs. I haven't had a chance to check it out until now, but it's a pretty cool keyboard. On a naked iPAQ, there's a little more play than I'd like - I wouldn't call it "wiggling room", but there's slight movement. Putting my iPAQ in a Silver Slider made it nice and solid. From what I can tell, it should work in any iPAQ sleeve, even the gigantic dual-PCMCIA slot sleeve. <!>
As far as the input on the keyboard goes, there's a learning curve but it's not difficult. The lack of an Enter key in the bottom right was a little disconcerting at first, but I got used to. Using a keyboard like this sure beats tapping that on-screen keyboard! It doesn't use any batteries, so the weight is low. A simple driver is all you need to get it working, and you're off. It was cool that they have replacement iPAQ buttons for the ones that are covered by the keyboard - you don't know how much you miss those buttons until they're gone. There's also a hot key for symbols & smilies - nice touch for those of us punching out email messages on it.
Looking for more? Pocket Now.com has a detailed review.
"Using the SnapNType keyboard, you can write e-mails, notes and enter data into your iPAQ anytime anywhere! It is small, light and compact allowing you to put it in your pocket. You can use it anywhere you go; whether it be on the street, on a train, in a meeting, at a conference or lecture. The SnapNType is a truly portable keyboard for mobile professionals and students. With its flexible and compact design, no longer you need to find a flat surface before you type!"
- Snaps on quickly and easily
- Fits your iPAQ handheld with or without expansion sleeves
- Feature buttons with tactile feedback and sized for quick thumb typing
- DC jack to charge your iPAQ while keyboard is connected
- Auto enable/disable ensuring maximum software compatibility
- Includes primary application and unique FaceBoard button
- No batteries required
You can pick one up from Mobile Fanatic for $39.95 (affiliate link).
A few weeks ago, Mike from Mobile Fanatic.com sent me the new SnapNType keyboard for the 3800 series iPAQs. I haven't had a chance to check it out until now, but it's a pretty cool keyboard. On a naked iPAQ, there's a little more play than I'd like - I wouldn't call it "wiggling room", but there's slight movement. Putting my iPAQ in a Silver Slider made it nice and solid. From what I can tell, it should work in any iPAQ sleeve, even the gigantic dual-PCMCIA slot sleeve. <!>
As far as the input on the keyboard goes, there's a learning curve but it's not difficult. The lack of an Enter key in the bottom right was a little disconcerting at first, but I got used to. Using a keyboard like this sure beats tapping that on-screen keyboard! It doesn't use any batteries, so the weight is low. A simple driver is all you need to get it working, and you're off. It was cool that they have replacement iPAQ buttons for the ones that are covered by the keyboard - you don't know how much you miss those buttons until they're gone. There's also a hot key for symbols & smilies - nice touch for those of us punching out email messages on it.
Looking for more? Pocket Now.com has a detailed review.
"Using the SnapNType keyboard, you can write e-mails, notes and enter data into your iPAQ anytime anywhere! It is small, light and compact allowing you to put it in your pocket. You can use it anywhere you go; whether it be on the street, on a train, in a meeting, at a conference or lecture. The SnapNType is a truly portable keyboard for mobile professionals and students. With its flexible and compact design, no longer you need to find a flat surface before you type!"
- Snaps on quickly and easily
- Fits your iPAQ handheld with or without expansion sleeves
- Feature buttons with tactile feedback and sized for quick thumb typing
- DC jack to charge your iPAQ while keyboard is connected
- Auto enable/disable ensuring maximum software compatibility
- Includes primary application and unique FaceBoard button
- No batteries required
You can pick one up from Mobile Fanatic for $39.95 (affiliate link).
